50 'Bmpcc 4k' For Sale in Singapore

Includes: BMPCC 4k Smallrig 2203 cage Sigma 18-35mm f1.8 canon mount (might have some issues with autofocus, need to check) Metabones EF-MFT speedbooster ultra Smallrig universal holder for external SSD Batteries Battery charger Camera power wire Text me for more info! This is the set up used in most bmpcc rigs, can see them on youtube.

For sale is a Blackmagic Pocket Cinema Camera 4K in fully working condition. Price does not include speedbooster (see below for details and list of accessories). Light user marks on the body, rubber ports covers have been removed for ease of access. Always kept in dry cabinet. Lowballers will not be entertained. Comes with the following accessories: - BMPCC4K AC Power Adapter - Smallrig 2203B Cage (attached) - Smallrig AAA2700 right-angle HDMI - Smallrig 3093 NP-F Battery Plate w/ cables - LP-E6 Battery

Full set with chargers. Includes: 3 lenses, charges, 1 npf battery and adapter, 1 cage, multiple lpe6 battery and charger Add $45 i give u my feelworld monitor also Note: usb-c port is broken, so only can use sd card. Sometimes it doesnt turn on, but just remove battery and put back and it works everytime, been doing this for years. Negotiable.

Letting go this highly rated low cos cinema camera. excellent for podcast, prob the most affordable and comfortable cinema camera out there. excellent for budding filmmakers or pros who shoot podcast, corp videos etc. used but in a very good cond. will include - 1 battery - 1 vmount battery - smallrig cage - 1 dummy battery with ac adapter. can plug in and roll. no box and not inclusive of davinci software. selling cheap not for fussy buyers. works well no issue.

RFS: Underutilised Bought it years back. Using different system now. Will upload real photos. Working condition with minimal signs of wear

Pre-loved! Includes the BMPCC4K camera itself, and the Tilta Cage in pictures. Cage model should be TITA01B in tactical grey. Kept in dry box when not in use. Clean sensor with no issues. Camera uses canon LP-E6N batteries in-body. Note left side rubber door had been removed for ease of rigging, and it won’t be included in this.

Selling my BMPCC 4K, in well working conditions, ready to shoot. Comes with the smallrig cage, NP battery holder (no battery included), wall charger, 2 canon batteries for the camera. Sensor is clean of fungi, it was kept in dry climate. Only issue: HDMI PORT DOES NOT WORK

Brand New

Right angle D-Tap V Mount Battery to Blackmagic Pocket Cinema Camera 4K 6K Pro 2-pin power port. Comes in ziplock bag. Length: 100cm / 1m My dumb *** got this right-angled cable without realising that it wouldn’t fit the cage. So someone please take it off me it was expensive 😔

BMPCC 4K. Used with care Comes with: - Full cage - AC cable

-Wooden camera dslr Small cage (for mirrorless camera) -Wooden Camera bmpcc 4k 6k cage -all the screws included -lws base plate -Top handle with lubber cover

We are the authorized KingMa Retailer in Singapore with official KingMa 1 year warranty. Brand new with box. Deal at our retail store at 35 Selegie Road #02-16 Singapore 188307 ☎️ Tel: 63378891 / 91143265 🕗 Mon-Sat (12-8pm) 🕕 Sun & PH (12-6pm) 💳For mail order, please purchase from our website at https://www.7daysdeals.com/dummy-battery-2 📷PRODUCT INFORMATION: 📌Highlights: Built-in latest advanced decoding circuit Display power level on camera Allows the use of v mou

*Platform limits listings & replies. Whats App (82237153) us directly. Visit www.blackmarketcamera.com for full range of products. Priority deliveries and coupons for return customers! https://www.blackmarketcamera.com/ * For more details and other products, go to the link above right now! - Fit for Blackmagic Pocket Cinema Camera 4k. - With the D-tap connector, it can power supply by the V-Mount Anton Bauer battery source. - It solves the problem of working outside for a longtime. ***PM to chec

BMPCC 4k (serviced new IR FILTER) EF METABONES XL Speed booster + $700 DTAP CABLE 2 x Ztay lp E6 (new) Smallrig cage

Brand new BMPCC 4K and 6K Tilta Cage - metallic color cage, SSD holder, Tilta Strap, 5” screen cover and many accessories. Never use as we never cross over from Sony to Black Magic Camera eco system.

Mint Condition - Comes with original box and receipt - FREE UV Filter included - No mold - Amazingly Sharp Lens for Photos & Videos - Great shallow depth of field - Fast Prime lens - For Micro Four Thirds mount - Replaced with a zoom lens Tags: Panasonic g7, panasonic g85, panasonic lumix, 12-35mm, 7-14mm, panasonic camera set, canon m50, canon eos rp, panasonic g95, pansonic g9, panasonic gh5, panasonic g100 zcam bmpcc4k Cinema camera Selling to fund other purchases

LP-E6N canon compatible battery 7.2V 2650mAh 19.6Wh Compatible with 1. BMPCC 4k , BMPCC6K and Micro Cameras 2. Canon EOS 5D MarkⅡ(5D2)/5D MarkⅢ(5D3)/5D MarkⅣ(5D4)/5Ds/6D/6D2/60D/60Da/7D MarkⅡ/7D/70D/80D Canon LP-E6 compatible Lithium-Ion rechargeable battery. LPE6 For use with Blackmagic Micro cameras , Blackmagic Pocket Cinema Camera and Canon cameras Battery

LP-E6N canon compatible battery 7.2V 2650mAh 19.6Wh Compatible with 1. BMPCC 4k , BMPCC6K and Micro Cameras 2. Canon EOS 5D MarkⅡ(5D2)/5D MarkⅢ(5D3)/5D MarkⅣ(5D4)/5Ds/6D/6D2/60D/60Da/7D MarkⅡ/7D/70D/80D You May Get the charger here https://www.carousell.sg/p/lp6-compatible-digital-battery-twin-charger-for-canon-lp-e6-battery-1234712087/ You May collect your order from our store We are located near Aljunied MRT Station EW9. It is Just a 3min Walk Address : 82 Lor 23 Geylang #01-05 ATRI

Like new cause did not shoot much on it. Am a c70 user, trying out Blackmagic but really cannot get use to the system. Full box with power supply. Comes with cage.

what all you can get.. •BMPCC4K Body with Box •Metabones BMPCC 4k EF speed booster, Ultra-0.71x •Smallrig Cage •Smallrig Handle •Smallrig SD holder •Smallrig HDMI/USB-C right angle adapter •Smallrig Rail mount system with 15mm tube •Tether Tools V mount battery (V-mount holder not Included) •D-Tap power Cable •F6 FEELWORLD HD Monitor( battery not included) •FOTGA DP500 MARK 3, PROFESSIONAL Lens Mattbox with full box "Excluded Samsung Sd card"

✅Brand New and Ready Stock ✅1*Year Warranty 🚫Price Fixed🚫 For Brands:Blackmagic DesignFor Models:BMPCC 4K & 6KSKU:4761Package Weight (kg):0.06 · Safety Indicator Light: D-TAP connector with reverse insertion prevention for added safety and convenience. · Stable Power Supply: Self-locking plug for secure and reliable power delivery. · Versatile Cable Management: Ultra-flexible PVC coiled cable for easy and adaptable cable organization. SmallRig D-TAP to BMPCC 4K/6K Power Cable 4761 f

Bmpcc 4k with cage. Comes with: Smallrig ssd holder 3 batteries Metabones XL 0.64 EF adapter Charger Mini xlr to XLR cable 0.3m Smallrig lens support adapter Barrel DC to 2 pin Lemo cable Smallrig HDMI ssd clamp

Extra piece that was misplaced. Brand new.

🔴 EARN CAPITAL STAR POINTS 🔵 CENTRAL AREA ( DHOBY GHAUT MRT STATION) 🟣 TRUSTED CAMERA SHOP WITH 1000K+ 5🌟 FEEDBACKS DELIVERY 🚚 CAN BE ARRANGE FEE OF $25-35 TO YOUR DOORSTEP We Are Located At 68 Orchard Road, Plaza Singapura #04-43 Bally Photo Electronics (238839) BUISNESS HOURS : 11AM-9PM MON-SAT 11AM-730PM SUN-P

✅Ready Stock In SG ✅Brand New ✅12* Months Warranty 🚫Fixed Price🚫 SmallRig NP-F Battery Adapter Mount Plate Kit for Canon EOS R5 / R5C and BMPCC 4K / 6K (Advanced Edition) 4340 is designed to enable NP-F batteries on the market (including Sony original and third-party batteries) to power BMPCC 4K/6K, Canon R5 C, and various mirrorless cameras, the set can achieve long-lasting power supply. The NP-F Battery Plate is made of aluminum alloy with gold-plated electrical contacts to be more durable and cond

Pro Grade XLR Cable : Professional series mini-xlr Adapter Cable, the sensible choice for 3 pin Mini-XLR Male to XLR Female Adapter Cable. Give you the perfect sound quality! Note: One end is a 3 Pin Mini-XLR connector, not a regular-sized XLR connector. Fantastic Audio Quality : 24 AWG 4N Oxygen Free Copper with shielding, deliver pristine sound, noise shielding, No hum, no noise, crystal clear music. High quality noise free performance. Delivers high-fidelity sound and provides optimal listening experien

1. This translucent LP-E6 battery is design by ZITAY, with 2pcs Panasonic NCR18500A. The quality is clear and visible. 2. This battery is the highest capacity LP-E6 battery available in the market at present, which is higher than the original capacity of Canon. Its life is up to 1000 cycles. Normal use for 3-5 years will not significantly reduce its capacity. 3. This battery is design for BMPCC 4K 6K, it is with High power consumption, high instantaneous current， it can last for a long time ( about 50 Min

Key Features: 1. Formfitting Full Cage. 2. Fits with Battery Grip Attached. 3. 1/4"-20 & 3/8"-16, ARRI 3/8"-16 Accessory Threads, Cold Shoes, and NATO Rails. 4. Locks Camera via Three 1/4"-20 Screws. 5. Built-in Allen Wrench. SmallRig Camera Cage is a formfitting full cage designed to provide protection and accessory mounts. The cage secures to the camera via a 1/4"-20 screw on the top and two on the bottom. It maintains full access to the camera's controls and ports when mounted on your camera, and it als

D-TAP to Dummy Battery Blackmagic BMPCC 6K/4K for Blackmagic BMPCC 6K/4K D-TAP to Dummy Battery LP-E8 for Canon EOS 550D, 600D, 650D, 700D D-TAP to Dummy Battery LP-E6 LP-E6N LP-E6NH for Canon EOS 60D, 70D, 80D, 90D, R, R5, R6, 5D II, 5D III, 5D IV, 5DS, 5DS R, 6D, 6D II, 7D, 7D II D-TAP to Dummy Battery LP-E17 for Canon EOS RP, 77D, 850D, 800D, 760D, 750D, 200D II, 200D, M5, M6 Mark II, M3 D-TAP to Dummy Battery EN-EL14 for Nikon D3100, D3200, D3300, D3400, D5100, D5200, D5300, D5500, D56

Key Features:
 1. Compatible with SmallRig Cage for BMPCC 4K 2203, CVB2254 and CVB2255.
 2. Works with 3 Metabones and Viltrox EF-M2 Lens Mount Adapter. SmallRig Lens Mount Adapter Support for BMPCC 4K 2247 is designed to work with SmallRig BMPCC Cage 2203, CVB2254 and CVB2255. It mounts to the cage by two M4 screws, and lock the Lens adapter by one 1/4 screw. It supports the Lens adapter, relieves pressure from heavy lenses and prevents loss of signal. NOTE: 1. This adapter support is NOT compatible

Canon EF Lens to BMPCC 4K Camera Body Supports In-Camera Aperture Control 0.64x Micro 4/3 Crop Factor Compensation Powered by Camera Body 1.33-Stop Increase in Lens Apertures 7 Optical Elements in 4 Groups Locking Mechanism to Secure Lens Rubber Gasket Prevents Dust and Moisture Brass Mounting Rings Detachable Tripod Foot

SmallRig Offset Kit for BMPCC 4K & 6K and Ronin S Crane 2 Moza Air 2 BSS2403 is designed to provide more clearance for the camera when mounted to gimbals. The kit includes a plate and a clamp and should be used with the original gimbal plate. Attach the plate to the camera bottom by a 1/4 screw, with anti-twist pins and rubber pads preventing wiggles and scratches; slide the clamp into the plate and fasten it by the lever; mount the whole kit to the gimbal plate. By using this kit, it’s easier to find the r

Key Features: 1. Formfitting Full Cage. 2. Fits with Battery Grip Attached. 3. 1/4"-20 & 3/8"-16, ARRI 3/8"-16 Accessory Threads, Cold Shoes, and NATO Rails. 4. Locks Camera via Three 1/4"-20 Screws. 5. Built-in Allen Wrench. Description SmallRig Camera Cage for BMPCC 4K & 6K with Battery Grip Attached 2765 is a formfitting full cage designed to provide protection and accessory mounts. The cage secures to the camera via a 1/4"-20 screw on the top and two on the bottom. It maintains full access to t

PRO GRADE XLR CABLE : Professional series mini-xlr Adapter Cable, the sensible choice for 3 pin Mini-XLR Male to XLR Female Adapter Cable. Give you the perfect sound quality! Note: One end is a 3 Pin Mini-XLR connector, not a regular-sized XLR connector. FANTASTIC AUDIO QUALITY : 24 AWG 4N Oxygen Free Copper with shielding, deliver pristine sound, noise shielding, No hum, no noise, crystal clear music. High quality noise free performance. Delivers high-fidelity sound and provides optimal listening experien

【Universal SSD Holder Mount】This 1.6"-2.6" (40-65mm) adjustable spring loaded Clamp holder bracket is compatible with Samsung SSD T5/T7/T7 Shield, compatible with San Disk Extreme Pro 1TB 2TB SSD E30/E61/E81, compatible with G-Technology G-DRIVE Mobile SSD, compatible with Glyph Atom SSD, compatible with Angelbird SSD2go PKT, and other mainstream SSD hard drives 【Universal SSD Holder Mount】This 1.6"-2.6" (40-65mm) adjustable spring loaded Clamp holder bracket is compatible with Samsung SSD T5/T7/T7 Shiel

ABOUT THIS ITEM 【FOR SELECT SMALLRIG CAGES】SmallRig Right-Angle Adapter for HDMI & Type-C AAA2700 is specially designed for SmallRig camera cage for BMPCC 4K like 2203, 2203B, CVB2254, CVB2254B, CVB2255, CVB2255B and 2766. 【RIGHT-ANGLE ADAPTER FOR HDMI/USB TYPE-C】It features male plugs on the camera side for HDMI and USB Type-C, and female plugs on the other end for HDMI and USB Type-C. It's the perfect two-in-one adapter used to change the direction for HDMI and Type-C ports to the screen. ( Note: Pl

Key Features:
1. Formfitting Full Cage.
2. Fits with Battery Grip Attached.
3. 1/4"-20 & 3/8"-16, ARRI 3/8"-16 Accessory Threads, Cold Shoes, and NATO Rails.
4. Locks Camera via Three 1/4"-20 Screws.
5. Built-in Allen Wrench. SmallRig Camera Cage for BMPCC 4K & 6K with Battery Grip Attached 2765 is a formfitting full cage designed to provide protection and accessory mounts. The cage secures to the camera via a 1/4"-20 screw on the top and two on the bottom. It maintains full access to the camera's controls

SmallRig HDMI & Type-C Right-Angle Adapter for BMPCC 4K Camera Cage AAA2700 is specially designed for SmallRig camera cage for BMPCC 4K like 2203，2203B，CVB2254，CVB2254B，CVB2255，CVB2255B and 2766. It’s the perfect adapter used to change the direction of the HDMI and Type-C ports to the screen. It features a thumbscrew to fix the adapter to the side of the camera cage tightly, and ensure a more stable connection. The 2 in 1 HDMI and Type-C adapter takes up very little space and won’t affect the use of other i

▶ Blackmagic Design Pocket Cinema Camera 4K/6K (BMPCC 4K/6K) ▶ With this power cable, you can use your DJI Ronin S stabilizer to power your camera conveniently ▶ The connect adapter cable allows you power your BlackMagic Pocket Cinema Camera 4K with DJI RONIN-S GIMBAL battery to save weight. ▶ The 2 pin connector will automatically lock when you plug it in. It is impossible to pop off, You should pinch the top of the 2 pin connector, which will easily pull it out, rather than pull out by pinching directl

SmallRig HDMI & Type-C Adapter for BMPCC 4K & 6K Camera Cage 2960 is specially designed for SmallRig camera cage and L bracket for BMPCC 4K & 6K like 2203, 2203B, CVB2254, CVB2254, CVB2255, CVB2255B, LVB2635, 2765, 2766. It will protect the camera HDMI and Type-C ports from possible damages and won’t affect the use of other camera ports. It features two screws to tightly fix the adapter to the side of the camera cage and ensure a more stable connection. Designer: Peiwen He , Abby Huang Note: 1. Pleas

SmallRig HDMI & USB-C Cable Clamp for BMPCC 4K & 6K 2246B SmallRig HDMI and USB-C Cable Clamp for BMPCC 4K and 6K Cages (New Version) 2246B is compatible with SmallRig 2203B, CVB2254B and CVB2255B new version rigs for the Blackmagic Pocket Cinema Camera 4K and 6K. The clamp attaches to the side of the cage with two 1/4”-20 knob screws, securing both the HDMI and USB-C cable by tightening two sliding blocks. The included Hex spanner can be applied to tighten the screw as well. The clamp prevents the cables

PROMOTION PRICE NOW LESS 30% FROM LIST.!! Key Features:
 1.for SmallRig 2203, CVB2254 and CVB2255 old version cages
 2.secures both HDMI and USB-C cables
 3.attaches to cage with 2 x 1/4”-20 screws
 4.durable Aluminum Construction SmallRig HDMI & USB-C Cable Clamp for BMPCC 6K and 4K Cages (Old Version) 2246 is compatible with SmallRig 2203, CVB2254, and CVB2255 old version cages for the Blackmagic Pocket Cinema Camera 4K and 6K. The clamp attaches to the side of the cage with two 1/4”-20 knob screws.

SmallRig HDMI & Type-C Right-Angle Adapter for BMPCC 4K Camera Cage AAA2700 DESCRIPTION SmallRig HDMI & Type-C Right-Angle Adapter for BMPCC 4K Camera Cage AAA2700 Key Features: 1. Designed for SmallRig camera cage and L bracket for BMPCC 4K like 2203，2203B，CVB2254，CVB2254B，CVB2255，CVB2255B，2766. 2. Perfect adapter used to change the direction of the HDMI and Type-C ports to the screen. 3. It features a thumbscrew to fix the adapter to the side of the camera cage tightly, and ensure a more stable connect

SmallRig DC5525 to 2-Pin Charging Cable for BMPCC 4K/6K 2920 is designed for use with the SmallRig NP-F Battery Plate EB2504. It plugs into BMPCC 4K/6K at one end and connects to the battery plate via the 5.5/2.5mm DC male connector. The total length is 40cm. Designer: He Chen NOTE: Please plug the cable to the 12V output on the battery plate. Compatibility: SmallRig NP-F Battery Plate 2504 BMPCC 4K/6K Package Includes: 1 x DC to 2-Pin Cable Product Dimensions: 400 x 55 x 25mm Package Dim

SmallRig NATO Handle for Samsung T5 SSD HSN2270 is a comfortable wooden handle, which can attach directly to the left NATO rail on SmallRig BMPCC 4K & 6K Cage 2203, 2254 and2255, and Z CAM E2 cage 2264. It is switchable to be used on both left and right hands. The handle leaves space inside to accommodate the Samsung T5 SSD, protecting the SSD drive and making the camera rig more compact. Also the anti-off lock on the bottom prevents accidental dropping of the SSD. Simply put the SSD into the handle from th

Key Features:
1. A 15mm single rod clamp designed to mount a follow focus motor.
2. Works with SmallRig BMPCC 4K & 6K cage 2203, 2254 and 2255. SmallRig 15mm Single Rod Clamp for BMPCC 4K & 6K Camera Cage 2279 is a low-profile rod clamp. It is designed for BMPCC 4K & 6K to mount a follow focus motor. It works with SmallRig cage 2203, CVB2254 and CVB2255, attached to the bottom left corner of the cage by two 1/4 screws. By holding a 15mm rod firmly, follow focus motor like Tilta Nucleus Nano, PD MOVIE and R